We'll connect you with nearby partnered installers who know this exact setup.

Rhino Rack

Rhino-Rack Pioneer Platform Rack with Backbone Mounting System - 59" Long x 49" Wide

Part Number: RR82AP

44 Reviews

In Stock

$1,579.98

Not Confirmed to Fit

2002 Nissan Maxima

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

rhino rack roof platform 59l x 49w inch rhino-rack pioneer with backbone mounting system - 59 long 49 wide

rhino rack roof platform rhino-rack pioneer with backbone mounting system - 59 inch long x 49 wide

rhino rack roof 59l x 49w inch manufacturer

rhino rack roof platform 59l x 49w inch rr82ap

Show All (16) Product Images

Show Fewer Product Images

In Use/Installed

Show All (1) In Use/Installed

Show Fewer In Use/Installed

Videos

First look at the Rhino-Rack Pioneer Platform 6 Series

Show All (1) Videos

Show Fewer Videos

We'll connect you with nearby partnered installers who know this exact setup.

SCHEDULE AN INSTALLATION

Built for off-road use, this aerodynamic platform rack's large, flat surface accommodates loads of all shapes and sizes. Backbone mounting system provides a stable mounting surface for the platform. Compatible with many Rhino-Rack accessories. Great Prices for the best roof rack from Rhino Rack. Rhino-Rack Pioneer Platform Rack with Backbone Mounting System - 59" Long x 49" Wide part number RR82AP can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

Rhino Rack Roof Rack - RR82AP

Highlights

Custom Fit for Your Vehicle: Installs on your roof with a kit designed for your vehicle.
Expands Cargo Capacity: Large 59" long x 49" wide platform carries gear of all shapes and sizes.
Stable Mounting Base: Backbone system creates a rigid, permanent foundation for heavy loads.
Simplifies Accessory Setup: Integrated channels fit awnings, lights, shovel holders, and more.
Quieter Highway Drives: Low-profile, aerodynamic design helps reduce wind noise and drag.
Built for Tough Conditions: Aluminum frame with reinforced nylon connectors resists off-road wear.

Features to know about

Carry the Big Stuff with Confidence: Large, Flat Platform Surface

When you’ve got bulky gear that doesn’t fit on traditional crossbars, the Rhino-Rack Pioneer Platform gives you the room to bring it all. Its 59" long x 49" wide surface offers a broad, flat base for hauling everything from camp boxes to recovery gear. The low-profile frame keeps things stable and evenly supported, so you can load up without juggling awkward tie-downs or uneven weight.

Stay Stable on Any Terrain: Backbone Mounting System

Off-road trips and long hauls call for strength you can trust. The included Backbone mounting system gives the platform a solid foundation by creating a permanent, fixed surface on your roof. Once installed, it keeps the rack planted and rattle-free over rough ground. The torque tool set makes setup and later maintenance simple, so your rack stays secure trip after trip.

Quiet Drives Ahead: Aerodynamic, Low-Profile Design

Roof racks can add noise and drag, but this platform keeps things smooth. Its low-profile, aerodynamic shape helps reduce wind noise while you’re cruising down the highway. A detachable wind fairing adds another layer of quiet performance, making it easier to enjoy the drive without constant whistling overhead.

Customize How You Carry Gear: Integrated Accessory Channels

Every plank and frame rail is built with integrated channels for attaching accessories. That means you can mount awnings, light brackets, shovel holders, spare tire carriers, or use accessory bars (RR33AP – sold separately) for kayak carriers and cargo boxes. Wiring from lights or other gear can even be routed internally through the perimeter of the platform for a clean setup.

Built to Handle the Elements: Rugged Aluminum Construction

The Pioneer Platform is designed and tested for off-road conditions in Australia, so it’s ready for harsh environments. The aluminum frame has reinforced nylon connectors and a durable powder-coat finish that resists scuffs and corrosion. It’s tough enough for trail dust, road salt, and heavy loads—all backed by a 5-year limited warranty.

Specs

Dimensions

Dimensions: 59" long x 49" wide x 1-3/4" tall

Warranty

Warranty: 5-Year limited warranty

62100F Rhino Rack Pioneer 6 Platform Roof Tray - Aluminum - 59" Long x 49" Wide

RJGB1 RhinoRack Backbone Mounting System for Pioneer Platform - Jeep Grand Cherokee

Installation Details RR82AP Installation instructions

Alternate Instructions RR82AP Installation instructions

This Product Fits The Following Vehicles

2011 - 2021 Jeep Grand Cherokee
2022 - 2022 Jeep Grand Cherokee WK - old body

Video of Rhino-Rack Pioneer Platform Rack with Backbone Mounting System - 59" Long x 49" Wide

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video in use rhino rack platform rack rr32tb

First look at the Rhino-Rack Pioneer Platform 6 Series

Video Transcript for First look at the Rhino-Rack Pioneer Platform 6 Series

4.8

44 reviews

5 Stars		(39)
4 Stars		(2)
3 Stars		(2)
2 Stars		(1)
1 Star		(0)

by: LEE H. 03/27/2019

Jeep Wrangler

The RINO RACK AND PIONEER PLATFORM are a great addition to my little Wrangler.
etrailer folks were very helpful in determining exactly what I wanted and needed. The assembly instructions are very good - even though there are a lot of parts to assemble. I was able to complete the assembly by myself (with help getting the top off the jeep.) If I can offer a recommendation from my experience, I would pre-assemble the entire unit with the mounting brackets finger-tightened to the platform AND THEN set it on the roof - to insure that the holes needed to be drilled are in exactly the right spot. I had to re-drill two holes and maybe that was my own fault, but until I did, i could not get the platform to rest in the mounting brackets.
All that said, I am VERY PLEASED with the RINO RACK product. It is very secure, easily accessible, very low profile (3" from roof to top of rack), large platform that still allows removal of the Freedom Top on my rig. It will give me the extra carrying capacity as we tow the jeep behind the motor home from Arizona to Alaska and hit lots of back country for tent camping in the process!!

Click to Enlarge

Lee H. One Year Later

3/29/2020

Iwe continue to enjoy and appreciate the platform- AND i have addedthe rails, which have really helped with securing a load!!

by: C-92 09/20/2019

2016 Jeep Wrangler Unlimited

I ordered the Rhino Rack Platform Rack with Backbone System for my 2016 Jeep Wrangler Unlimited to enable it to mount a rooftop tent. The rack is expensive at about $1600 all in, but I have no question about this rack’s capabilities and it looks awesome. I prepped myself by watching several different videos, including etrailer’s installation video. Everything went fairly well, but I encountered a couple of minor issues.
First, when I bolted the platform extrusions to the end rails from the bottom of the rack, I didn’t pay attention to the topside of the extrusions. After completing this and turning the rack right side up, I found that each screw had forced the ends of each extrusion up slightly so that they were not flush to the end rails. I am debating whether to leave this as is or to remove each screw and add another washer to relieve the pressure it is causing.
Second, although I carefully placed the rear and middle brackets in position and was careful with the drilling template for the front bracket, there was still some misalignment that couldn’t be overcome by the small ovals where the legs connect to the platform. I had to expand these ovals by drilling them wider. Eventually I got a good fit.
Finally, the quick mount legs required two different keys to remove the platform. This was caused by the quick mount legs coming in the form of two separate kits. One kit contained two legs and one key (no spare) and the other kit had four legs and two keys. The key numbers from these two sets were different. I contacted etrailer, but they had no control over the key set packaging and referred me to Rhino Rack. Rhino Rack was very responsive and sent me new cylinders and keys so that I had locks that were all keyed the same, as well as having a total of four matching keys.
We haven’t used the rack yet, but I love the styling and enhancement it gives my Jeep. Just check out my picture...

Click to Enlarge

C-92 One Year Later

9/21/2020

I still love the Rhino Rack platform and it works great with my rooftop tent!

by: Andrew P. 10/21/2019 One Year Later

2018 Toyota 4Runner

I bought this roof rack to mount on my 2018 Toyota TRD Off Road 4Runner. The reason I purchased it was because of the versatility that this product offers. There are many roof racks out there for my vehicle. Some are cheap and some are expensive. Some racks are smaller and some are full size. I was looking for a rack that wouldn't break the bank as well as cover a majority of the roof (without drilling). I have two young kids and I'd like to get them out more. Hence, buying the 4Runner as well as the rack. This rack will enable me to load a ton of stuff on it in the future such a roof top tent, awning, etc. Even though I'm somewhat handy, the installation did take around 3-4 hours. I did have one other person helping me. I highly recommend having an additional set of hands helping during the installation. The sides rail installation was easier than I thought it would be. The platform itself took longer to install. Overall: very happy with this product. I highly recommend it.

Click to Enlarge

Andrew P. One Year Later

10/22/2020

I love this roof rack! Since I purchased it, I also purchased the eye bolts for the rack and have used them numerous times over the past year. I have been able to move many different things on top of the rack. At this point, Im looking at possible getting the side guards in the near future.

by: Denver 03/18/2026

2021 Ram 1500

I strongly recommend verifying all platform plank lengths before starting installation. Two of mine were undersized by approximately 1/2”–3/4”, which is a significant quality control issue and should not pass inspection from the manufacturer.

Because the platform is assembled upside down, this discrepancy wasn’t obvious until later in the process. In my case, the platform and rails also arrived in separate shipments, and in an effort to keep the project moving, I had already drilled the mounting holes and installed the rail system before discovering the problem.

To be clear, this is not a reflection on etrailer.com—they were not the issue here. The problem lies with the manufacturer’s lack of quality control.

Once fully assembled, the system is solid and performs as expected. However, I would advise anyone installing this to carefully inspect and measure all components upfront before committing to drilling into their vehicle.

by: Casey 04/10/2025

The Pioneer Platform is very solid. Good construction. My only issue is that instructions on cross member placement etc are not very clear. Takes some research. Also, the wind dynamics are a little to be desired. I get a whistling noise when driving. This should have come standard with a wind deflector. Whistling is very annoying. The only way to stop the noise is by attaching some accessories to break the airflow causing the noise….which is more money.

Click to Enlarge

by: Ken 07/31/2020

I have been looking a long time for a good roof rack for my 2018 Toyota 4Runner and decided on the Rhino Pioneer Platform with the Backbone mounting system.
Removal of the factory side rails was very easy. Putting the platform together was relatively easy and installing the Backbone mounting system in the existing factory holes was also quiet easy. Attaching the platform to the Backbone mounting system was a bit more challenging for me. I tend to take my time and double check everything as I go. Total build and installation time was approximately 6 hours. The end result is fantastic, it looks great, is very solid, will easily accommodate my needs (Rooftop Tent, lumber trips to Home Depot, Kayak, Mountain Bike, etc.). I have taken a couple of trips on the highway 80MPH and the wind noise is noticeable but acceptable. I will probably purchase the wind deflector and hope this will also positively impact the gas mileage.
The people at etrailer are exceptional to deal with! Their pricing is good, their communication is excellent, shipping was fast, the packaging was perfect with all parts well protected and nothing missing. If you have any questions about the product or installation, they are knowledgeable and happy to help.
The rack is solid, good looking, and well made. At this point my only concern is the high price for various accessories. I highly recommend this roof rack system and dealing with etrailer is a pleasure.

Click to Enlarge

by: Brainless 10/30/2020

2019 Ram 2500

Excellent build and fit for the 2019 RAM Power Wagon WITH a sunroof. I would highly recommend using additional RTV to seal the holes. It barely clears the Sat antenna and the sunroof. The satellite radio cuts off easier because of the rack being on top of it. Instructions are clear enough for a DIY-type person to get this done properly.
The rack, just like any roof rack does introduce more wind noise at high speed.

Click to Enlarge

by: Darrin 04/07/2022 One Year Later

Rhino rack builds a great product. The armada backbone and pioneer platform are sturdy and fit well. Customer service and shipping from etrailer were flawless.

Click to Enlarge

by: Austin Tyler 03/29/2020

2015 Toyota 4Runner

There are so many options for the 4Runner. Going through all the research, choosing one, and being happy with it in the long run are overwhelming to someone like me that just has to be able to see all the angles. We did have a few requirements. It needed to be low profile enough to fit in the garage, it needed to be able to hold a RTT, and not break the bank.

In the end, it came down to 3 options.
Gobi
Rhino Rack
Front Runner

I ruled out the Front Runner option because I wasn’t comfortable with drilling holes in the roof. Not that it can’t be done and done well. I just wasn’t comfortable doing it myself, nor did I have a local shop that I trusted to install the nutserts.

Gobi was next to get eliminated. I love the look and the name speaks for itself with regard to quality. However, the long lead-times and high price tag were turn off’s.

Short story long - We chose the #RhinoRack #pioneerplatform. First impressions - It looks great. It is lighter than the ARB we had before. Wind noise isn’t terrible at 70mph+. The textured powder coat seems tough enough. I like the full length. The #4Runner with 3inch lift still fits in the garage without drama. AND it was delivered to my door 3 days after ordering thanks to #etrailer

The only negative feedback I can give are the directions. There were a couple head-scratcher moments.

Click to Enlarge

by: Marcus W 07/13/2020

The Rhino Rack Pioneer Platform is awesome! Great installation instructions and very well built. Now it time for accessories!

Click to Enlarge

by: Jonathan 12/24/2018

2015 Toyota 4Runner

Awesome rack! Solid functionality and sharp looking on my 4Runner. Only downside is lots of parts and pieces/screws/bolts/washers to manage to put together...worth it in the end, however. Price and service from etrailer also could not be beat, and I did my research! Thank you all around.

Click to Enlarge

by: Jay 01/03/2024 One Year Later

This is a solid and versatile rack. Really well constructed. I bought mine wider than the vehicle for extra space. I found many generic options for attachment accessories. It's flat when I need it to be for airport parking garages. One year later, it's still awesome!

Click to Enlarge

by: Dan 01/03/2023

Great fit with the Rhino Rack backbone for Gladiator and the Bestop Sunrider.

Click to Enlarge

by: GH 07/16/2021 One Year Later

I like this rack. Looks sharp and does what I need to to!

Click to Enlarge

by: Ray 02/26/2022

2014 Toyota FJ Cruiser

I can’t say enough about etrailer.com… fast shipping, and the most comprehensive tracking I’ve ever seen! I will definitely be shopping at etrailer in the future.
The Rhino rack kit is incredibly sturdy. The instructions are not narrated well, but this wasn’t my first rodeo… definitely a well made product from down under.
Mounting the rails was a bit daunting… you WILL need that supplied Allen wrench… bring your patience!
All in all just a beautiful burley roof rack. I’m very satisfied with my purchase.
Thanks again etrailer.com… you guys rock!

by: Brandon E 04/17/2017

If you're looking for a tray/platform roof rack this should be it. Works and looks great. Very versatile and useful. I plan to carry kayaks and numerous camping/tailgating equipment with this platform.

The install took a while but is well worth it. Also, shipping was longer than estimated but I was updated several times by etrailer about the shipment.

by: Daniel 12/31/2021 One Year Later

Way more of a pain to install than I expected. Assembly of the platform was really easy. But putting on the rails was tricky given the space to screw in. And attaching the platform to the rails was a pain. However after installation, I love this rack. It whistles a bit but I don't have the wind break. It's great for hauling but I appreciate more a place to just chill and enjoy the scenery when I stop in the wilderness. I bought this specifically to install a Bundutop tent. Haven't got it yet but this platform will be perfect for it.

by: Anthony 05/18/2022

I purchased this for my 2017 Nissan Armada I'm very happy with the quality definitely worth the price tag. Only one thing that might need looking into I had a factory roof rack the middle support on stock rack only has one bolt the backbone rail has 2 mounting holes so I had to take roof trim off and and use a Dremel to cut out larger holes on each side to get the second mounting hole for the middle just a little modification not sure if this is just a 2017 issue but happy with the outcome I have all measurements written down as well if anyone would like it makes it easier to set up mounting platform because if you get it wrong you will need that second person to help bring it back down and reposition mounting points. I bought this because if u have a Armada you know the trunk space is very limited another reason I like this product is it's low profile and I'm able to park in the garage still and that's a must. Hope this helps with making a large purchase I will provide pictures

by: Rod 12/05/2022 One Year Later

Overall, I like the rack. I use it for a hard shell RTT and it has held up well through several camping and off-roading trips. I chose this rack for the low profile look, weight and mounting system.

Rod K. One Year Later

12/6/2023

The rack is still doing great! No issues and the mounting system is holding up well even under some harsh off-roading conditions.

by: Mike 04/02/2022

2020 GMC Yukon XL

Ordering super easy, shipping was very fast (doesn't happen so much during covid).

Wish you would sell the wider so that rack fit over sides of vehicle better.

Make certain to measure where the crossbars mount to the vehicle in millimeters. Being off by 1/8 inch on front bar means the back wont align at all. Other than that the instructions were perfect. There weren't any pictures nor much in the manuals about this alignment step (only the on line you tubes briefly touched on it).

I would buy one more long piece & 2 wider end pieces so that the entire rack fit OVER the sides of SUV, but could not get anyone to sell me that option.

by: Chad 05/18/2021 One Year Later

Tough, easy to install, excellent platform for all my things (cargo box, two bikes for now) and flexibility for the future. Next up, KC Highlights mounted on the front. Well worth the money for fit and finish.

by: Kenneth 01/31/2018 One Year Later

The rhino rack pioneer setup with the backbone mount is a fantastic roof rack system.

by: Brent 12/18/2019

I almost never write reviews. However, I will make an exception this time. This is my third order with etrailer.com. The previous two were straight forward. This one was not. I was ordering a roof rack for my 200 series Land Cruiser. There were several concerns I had with it. Emily went to the manufacturer to sort out areas I was concerned about. She called me back within 30 minutes with accurate information. I would not have spent the $1,400 on the rack with out the specifics. It was nice not having to do all the research on my own, and getting significant help was a gift. Much appreciated! Hence the review.

by: Marco 10/20/2022

Quality built to tight tolerances. Easy to follow instructions with plenty of on-line videos to help with the installation. Don't hesitate to buy this better designed / better built / better looking roof rack.

by: Richard 09/20/2022

The rack is top notch and sturdy. Perhaps just as important the customer service from etrailer is excellent. They answered all my questions and were very helpful.

Richard One Year Later

9/21/2023

I have used the rack multiple time now and it is still going strong and sturdy.

true

Show More Reviews

See what our Experts say about this Rhino Rack Roof Rack

Do you have a question about this Roof Rack?

Info for this part was:

Updated by:

Wilson B

Updated by:

Daron K

Updated by:

Michael B

Updated by:

Lincoln B

Written by:

Alex H

Video Edited:

John S

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.